Toyota 4Runner Accessories
Engineered to precisely fit your vehicle, all-weather floor liners are made from durable, flexible, weather-resistant material that cleans easily.
- Precise injection molding uses Toyota’s original vehicle design data for a perfect fit
- Includes two rear liners to help provide more complete coverage
- Liners feature ribbed channels to better hold moisture and a stylish vehicle logo
- Skid-resistant backing and driver- side quarter-turn fasteners help to keep the liners in place
- Made in the U.S.A.
This floor mat/liner was designed specifically for use in your model and model year vehicle and SHOULD NOT be used in any other vehicle. To avoid potential interference with pedal operation, each mat/liner must be secured with its fasteners. Do not install a floor mat/liner on top of an existing floor mat.
Step into the comfort of a pre-cooled or pre-heated cabin, thanks to the remote engine starter.
- Activates air conditioner, heater, defroster and defogger functions to preset temperatures and settings
- Engine starts with quick, three-step sequence using keyless factory remote
- Integrates with keyless entry system and existing factory security
Available only for vehicles equipped with factory remote keyless entry and Smart Key.
Weight: 2.2lbs
The roof rack cross bars are designed to integrate with the 4Runner’s roof rails to secure cargo with more confidence.
- Provides additional secure tie-down points for various roof rack accessories
- Easy to adjust by sliding along the side rails, and lock in place with thumb screws
- Can support a maximum of 132 lbs. when weight is evenly distributed across both bars
- Set of two black bars
Do not overload your vehicle. See owner’s manual for weight limits and restrictions.
Help prevent door edge dings and chipped paint with this protective finishing touch.
- Thermoplastic-coated stainless steel is precisely matched to the exterior finish
- Compression-fitted to door edge contours
- Blend seamlessly to complement exterior styling
Weight: 0.1lbs
Add style and function with a set of running boards. They make it easier to step into the cab, and they complement the rugged good looks of the 4Runner.
- Skid-resistant step pads help ensure secure footing
- Sleek design enhances the finished look of the vehicle
Weight: 34.8lbs
Hopping in and out of your 4Runner just got a bit easier thanks to these sturdy, stylish running boards.
- Skid-resistant step pads help ensure secure footing
- Streamlined and finished look
Weight: 31.5lbs
Hopping in and out of your 4Runner just got a bit easier thanks to these sturdy, stylish running boards.
- Skid-resistant step pads help ensure secure footing
- Streamlined and finished look
Weight: 35.38lbs
A highly functional and stylish upgrade for your vehicle, the predator tube step complements the 4Runners’s rugged design and improves access to the cab.
- Black powder-coated finish
- Drops steps for easy access
- Durable, 6061 aluminum construction is chip and rust resistant
Lightweight cargo net helps secure everyday items from rolling around.
- Quick and easy attachment and removal
- Envelope-style netting accommodates a wide variety of shapes and sizes
- Stores flat when not in use
Cargo and load capacity limited by weight and distribution. Always properly secure cargo and cargo area.
Weight: 0.6lbs
Keep your precious cargo away from prying eyes with this cargo cover, custom designed specifically for the 4Runner’s cargo area.
- Attaches to cargo area side panels
- Helps protect against sun damage, fading and theft
- Made of durable, UV- and stain-resistant woven polyester
- Simple to install and remove
Cargo and load capacity limited by weight and distribution. Always properly secure cargo and cargo area.
Weight: 7.5lbs
Whether you’re tailgating or loading bulky items, you’ll find the rear sliding cargo floor (in select 4Runners) invaluable. Make it even more functional with this cargo divider that provides a barrier to keep things from rolling under the sliding cargo floor.
- Locked down, it allows larger cargo items to slide over it
- Four nylon hinges add strength and durability
Cargo and load capacity limited by weight and distribution. Always properly secure cargo and cargo area.
Weight: 5.5lbs
Tough, flexible cargo tray helps keep damage from spills and everyday wear and tear to a minimum.
- Precisely engineered to fit the 4Runner’s trunk floor and easy to install and remove
- The molded perimeter lip helps contain spills
- Skid-Resistant surface helps keep cargo from sliding around
Cargo and load capacity limited by weight and distribution. Always properly secure cargo and cargo area.
Weight: 4.2lbs
Help protect your paint finish from road debris and the damage it causes.
- Blend seamlessly with exterior styling
- Set includes four mudguards
Weight: 0.79lbs
Finish off the 4Runners bold style with this shiny exhaust tips
- Constructed of polished, corrosion-resistant double-walled 304 stainless steel
- Easy bolt-on installation; no cutting, drilling, or welding
- Available in chrome or black chrome
Compatible with virtually all multimedia devices, it holds your tablet, phone, and music or video player in place.
- Installs and removes in seconds-no tools required
- Durable construction with spring-loaded arms to hold your device in place
- Adjustable pivot/tilt enables passengers to view their device at eye level
Universal Tablet Holder is intended for passengers only. Drivers should always be sure to obey traffic regulations and maintain awareness of road and traffic conditions at all times. Use of aftermarket accessories may pose an increased risk of injury to occupants in the event of an accident. Tablet sold separately.
This seat cover helps to protect your second-row seat interior from scratches, rips, mud, and dirt while traveling with your beloved pet.
- Made with breathable fabrics with quilted, padded base to ensure optimal comfort for your pet
- Precision tailored for a custom fit and easy access to seat and shoulder belts
- Features an embroidered 4Runner logo to accent your interior
- Easy installation, and removable for machine washing
- Available in black, gray, or tan
The Toyota Genuine Accessory Warranty will only apply when the installation is performed by a trained Toyota-approved installer. Please see dealer for details. Not for use with child seat. WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
Engineered to precisely fit your vehicle, all-weather floor liners are made from durable, flexible, weather-resistant material that cleans easily.
- Precise injection molding uses Toyota’s original vehicle design data for a perfect fit
- Includes two rear liners to help provide more complete coverage
- Liners feature ribbed channels to better hold moisture and a stylish vehicle logo
- Skid-resistant backing and driver- side quarter-turn fasteners help to keep the liners in place
- Made in the U.S.A.
This floor mat/liner was designed specifically for use in your model and model year vehicle and SHOULD NOT be used in any other vehicle. To avoid potential interference with pedal operation, each mat/liner must be secured with its fasteners. Do not install a floor mat/liner on top of an existing floor mat.
Beef up the aggressive stance of your 4Runner while protecting it’s underbody from off-road hazards with the TRD skid plate.
- Prevents damage to underbody from rocks, branches, ice chunks, and other types of road debris
- Easy no-drill installation uses vehicle’s existing attachment mounts
- Rigorously tested to maximize protection and prevent vibration, stress and noise
- Won’t interfere with or block cooling system
- Provides unobstructed access to all maintenance points and vehicle tow hooks
- Made from stamped and formed 1/4-in thick aluminum with injection-molded red TRD lettering
- Silver powder coated finish
Nothing makes a statement quite like custom wheels. These alloys with the TRD logo center cap throw down while styling up.
- Off-road race-inspired 17-in. x 7-in. cast aluminum wheel with 6 lug nut pattern
- 11-mm. with 4-mm. wheel offset widens the overall vehicle track width by 0.9-in. (22 mm.) for more aggressive stance
- Incorporates the proper weight, offset and brake clearance to ensure proper fit, finish and reliability
- Extensive ride, handling and strength tests ensure wheels meet TRD’s high-quality standards
17-in. off-road performance tires are often expected to experience greater tire wear than conventional tires. Tire life may be substantially less than mileage expectancy, depending upon tires used and driving conditions.
Weight: 24.69lbs
